Derbi GPR50 2003 France project

[benito brz]

Hello everyone, I've put the bike on wheels, it looks amazing but the wheels aren't turning well, maybe because i didnt put the bearings correctly






I've put this on the bearings so they can stay in

[benito brz]

Here is the front brake, i received a lot of parts and i will change the pistons









LETS PUT SOME BRAKE LIQUID SO IT WILL FIT EASIER




BUT THE PAINT ON THE BRAKE CALIPER IS GOING OUT BECAUSE I'M DUMB AND I'VE JUST PUT BASIC PAINT ON IT




I ALSO BLOCKED THE PISTONS, THEY WONT GO OUT !!!
SO I REASSEMBLY THE MASTER VAC AND PUT SOME BRAKE LIQUID IN IT SO THE PISTONS WILL MOVE, MY FATHER WAS HELPING ME, HE DOESNT WANT THE BEAUTIFUL PAINT OF THE MASTER VAC TO BE DESTROYED SO HE PROTECTED IT WITH SOME TAPE, BUT HE BROKES THE LITTLE WINDOW WITH HIS FINGER SO ALL THE BRAKE LIQUID DESTROYED THE MASTER VAC PAINT !!!!






JUST BECAUSE I WAS BUSY FOR THIS, I ORDERED A NEW BRAKE CALIPER AND MASTER VAC IN GERMANY, SO I DO NOT HAVE TO PAINT THEM
LESSON OF TODAY: DONT BE LIKE ME

[benito brz]

New parts from netherlands


















Cleaning









New clutch cable

[benito brz]

The rear brake, this time i will not disassembly the pistons or paint anything because i changed the brake caliper 2 years ago, i will clean everything and change the screws and washers.

[benito brz]

Hello everyone, i've bought some used wheels for cheap to replace my white wheels because they are too damaged to be used
but the wheels i bought on the internet are also a little damaged but its fixable, i want to paint them in white exactly like the others.
But my dad wants to take all my wheels to a guy who can fix them so i can use the white wheels and not paint again the other wheels.
I think we cant fix the white wheels but my dad wants to try, so i'm waiting for september for some news.







Here is the damage on the wheels i bought




And here is the white wheels, the discs aren't right when i screw them up on the wheels

[benito brz]

Here is a new brake caliper and master cylinder from Germany











I've also noticed this



Lets put it on the bike






New parts



Too much thread locker

[benito brz]

This screw was blocked, so I had to cut it




Lets change the piston






















New blanket for the bike

[benito brz]

The screws wich i had removed the rust starts rusting again, apparently putting wd40 on it is not enough, so i took all of them, clean them, and put some anti-rust on them (owatrol)








And after

[jkv357]

Wow! You have a new challenge every step of the way!

Good job working through it!

Just don't know what to say about the damage on both those sets of wheels. Doesn't make any sense to me.

[benito brz]

Wow! You have a new challenge every step of the way!

Good job working through it!

Just don't know what to say about the damage on both those sets of wheels. Doesn't make any sense to me.

Hi jkv
Thanks you very much, I really hope i will find a solution for the wheels because i can't do anything without them on the bikes