Gaskets for GPR 75 EBE075 engine

[jkv357]

I need a gasket set, mostly head gasket, for my GPR75 with the EBE075 engine.

Is there a model designation for the EBE075 engine? Is it an "AM-something"?

I would assume the head gasket for the 50 will not work with the 75 engine - is that correct?

Thanks.

[al_pritchard]

Just checked a head gasket from the 50cc. It’s ~41mm so it wont work on the 075 top end. The 075 bore is ~47mm.

I think the gasket part number you need is J0000DB000319 - that’s a big think, but it may be worth a chance. (https://comercialcasas.com/inicio/34330 ... 00319.html).

I see a number of gasket kits listed on eBay with that part number rebranding the 075. So maybe an option?


For archival reference:
EBE075 engine the stroke is 45mm, and the bore is ~47mm

[jkv357]

Just checked a head gasket from the 50cc. It’s ~41mm so it wont work on the 075 top end. The 075 bore is ~47mm.

I think the gasket part number you need is J0000DB000319 - that’s a big think, but it may be worth a chance. (https://comercialcasas.com/inicio/34330 ... 00319.html).

I see a number of gasket kits listed on eBay with that part number rebranding the 075. So maybe an option?


For archival reference:
EBE075 engine the stroke is 45mm, and the bore is ~47mm

Thanks Al!

I've been conversing with Treats, but they didn't have any definitive answers and asked me to pass along any info I can find.

[jkv357]

Treats will get a gasket set with their next order.

Benji at Treats has been super helpful.

And thanks to Al for doing some digging to come up with the numbers. I was striking out.

[al_pritchard]

Did you manage to get that gasket from Treats? And more importantly was it correct one?

[jkv357]

Did you manage to get that gasket from Treats? And more importantly was it correct one?

I haven't yet, they said it would be a while, but I should check back with them.

[jkv357]

Treats is working on it.

They haven't received their order yet.

Treats has been very responsive and helpful so far.