Support GPR Camp!!
Restoration Derbi GPR 50 R . France project
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Restoration Derbi GPR 50 R: Easy?
Cute photo! And the engine looks fantastic.
I am enjoying the fact that you consider a MetraKit Prorace an “easy” engine.
I am enjoying the fact that you consider a MetraKit Prorace an “easy” engine.
1 x
Re: Restoration Derbi GPR 50 R . France project
it is done!!
the Exhaust Metrakit Pro race is designed for supermotard Senda, is modified and mounted on the bike ..
changes:
removing the original bracket to create a new one for the GPR chassis. manufactured a new leakage skirt longer and welded to the exhaust body.
refurbishment of silencer (new pierced tube, welds, ceramic wool and cleaning)
the assembly on the bike is "tip-top" the fairings are installed perfectly!
next step, setting on my power bench, then GO !!!!
the Exhaust Metrakit Pro race is designed for supermotard Senda, is modified and mounted on the bike ..
changes:
removing the original bracket to create a new one for the GPR chassis. manufactured a new leakage skirt longer and welded to the exhaust body.
refurbishment of silencer (new pierced tube, welds, ceramic wool and cleaning)
the assembly on the bike is "tip-top" the fairings are installed perfectly!
next step, setting on my power bench, then GO !!!!
3 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Restoration Derbi GPR 50 R: おめでとう!!
Absolutely beautiful work Remi!
I have to agree that the stinger looks a bit close to the swing arm. Maybe a spacer on the lower mount could help with that issue. Your mod to the pipe looks factory. The welds are gorgeous.
Congratulations on such a nice restoration, and thanks for sharing it with us on GPR Camp.
I have to agree that the stinger looks a bit close to the swing arm. Maybe a spacer on the lower mount could help with that issue. Your mod to the pipe looks factory. The welds are gorgeous.
Congratulations on such a nice restoration, and thanks for sharing it with us on GPR Camp.
2 x
Re: Restoration Derbi GPR 50 R . France project
Thank you toratora
the bike is on the power bench.
Here is the verdict !!
21.86 HP at 13772 rpm and 1. 14 of couples.
I am pleasantly surprised at the result for an old cylinder of the 2000s (and yes, there has been huge evolution in the field since!)
unfortunately the engine is "hollow", but after a few carburetion tests, and tests of shims under the valve, here is the best compromise.
The bench I use is a SOFT ENGINE with the latest data acquisition system. it is the reference tool of the Italian bike preparers.
here are the pictures
the bike is equipped with a carburettor dellorto VHST under license stage6 standard model. I tested the same carburetor, but model R / T with tulipage and internal preparation. the difference in performance is not important enough for this more upscale model to be used on this simple "ballad" moped
the bike is on the power bench.
Here is the verdict !!
21.86 HP at 13772 rpm and 1. 14 of couples.
I am pleasantly surprised at the result for an old cylinder of the 2000s (and yes, there has been huge evolution in the field since!)
unfortunately the engine is "hollow", but after a few carburetion tests, and tests of shims under the valve, here is the best compromise.
The bench I use is a SOFT ENGINE with the latest data acquisition system. it is the reference tool of the Italian bike preparers.
here are the pictures
the bike is equipped with a carburettor dellorto VHST under license stage6 standard model. I tested the same carburetor, but model R / T with tulipage and internal preparation. the difference in performance is not important enough for this more upscale model to be used on this simple "ballad" moped
3 x
Re: Restoration Derbi GPR 50 R . France project
Isnt this a metrakit pro race 70? 21hp seems way too much. 2fast 100 makes 30hp with a great setup. This doesnt seems to be a pretty decent dyno.
A bit of a spoiler my 94cc Italkit was 25.5hp on a dyno. Weirdo
A bit of a spoiler my 94cc Italkit was 25.5hp on a dyno. Weirdo
0 x
Re: Restoration Derbi GPR 50 R . France project
Hi kaldis12 I'm not sure I understand your message.
Yes, this is a derbi € 2 engine equipped with a 70 cc Metrakit Pro Race (D47.6mm)
high engine Metrakit 70 prepared Balancing balance Metrakit MRD
valve box Vforce 85 CR
smile admission CR 85 honda carburetor dellorto VHST 28mm Metrakit Pro Race exhaust
ignition original derbi+ Variable CDI Top Perf Red
gearbox original
clutch mounted on bearing
disc clutch stage6 / malossi
result 21,86 hp, moreover I am more ready for 22 hp than 21 hp
Yes, this is a derbi € 2 engine equipped with a 70 cc Metrakit Pro Race (D47.6mm)
high engine Metrakit 70 prepared Balancing balance Metrakit MRD
valve box Vforce 85 CR
smile admission CR 85 honda carburetor dellorto VHST 28mm Metrakit Pro Race exhaust
ignition original derbi+ Variable CDI Top Perf Red
gearbox original
clutch mounted on bearing
disc clutch stage6 / malossi
result 21,86 hp, moreover I am more ready for 22 hp than 21 hp
1 x
Re: Restoration Derbi GPR 50 R . France project
moreover it's true a 100 2fast can give 30CV on AM6 engine, and much more on Derbi ...
an AM6 is a real shit compared to a Derbi
here is another of my machines with 100 fast AM6 (30CV without the air box)
an AM6 is a real shit compared to a Derbi
here is another of my machines with 100 fast AM6 (30CV without the air box)
3 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Restoration Derbi GPR 50 R — We are so not worthy!
Wow that's a really nice RS. I want to ask you so many questions about that bike! But I will wait until I get further along with my RS build.
As for MetraKit, when we took Ed's track GPR that has a ProRace set up it showed over 19HP on an engine that had a whole bunch of seasons on it.
As for MetraKit, when we took Ed's track GPR that has a ProRace set up it showed over 19HP on an engine that had a whole bunch of seasons on it.
1 x