GPR Camp: Replica Racers

Hello everyone, after i've introduced my Derbi GPR, I wish to introduce my new bike, an Aprilia RS4 125 from 2014. It's so cool to have this bike at 16 years old


So the plate light don't works, the voltage don't pass, I have to change the plate light


Changing of the front brake disc and pads


Not the good pads, I learned that there's 2 types of front brake for aprilia rs4


It's better

I've bought leds for my rs4, these are awesome and completely change the look of the bike

BEFORE

AFTER

New plate light, it's not the same but i took it because it had the same dimensions, and the rizoma was impossible to find.

Looking good!!!

Is there anything else available which is a bit more compact for the LED lights, looks quite bulky at the back of the lights, are the regulator/transformer needed for both sides or can you do it with one?

Also how much and where did you get you tail tidy from?

thanks

Berkeley wrote: ↑

Wed Nov 13, 2019 4:20 am

Looking good!!!

Is there anything else available which is a bit more compact for the LED lights, looks quite bulky at the back of the lights, are the regulator/transformer needed for both sides or can you do it with one?

Also how much and where did you get you tail tidy from?

thanks

HI Berkeley, there's another led lights more compact available but there's not powerful as mine, I've 2 led lights for normal night light without transformer (blue and grey) , but I have another led light more powerful than others led lights with a transformer(black and red) for the full night light. I bought them on Planèteleds.com.

And I've bought my tail tidy for 12,83 € on : labécanerie.com

Hi everyone, my bike dont run correctly at low RPM, like the fuel is not passing. So I checked out my air filter and it looks good to me (it was changed this year).








The spark plug looks good to me (it was also changed this year)



I've also found this so I have to change it






I'VE ALSO FOUND THIS !!





Weird yellow thing Inside my tank




Is it oil ?!




The yellow thing is from a garden hose, Strange…



Since I bought the bike, the guy tolds me the bike was leaking fuel when putting fuel in the tank. I founded the problem when I was washing the tank with water.

Cleaning the start relay




Painting the mirrors base










Changing the fuel sensor







Painting of one fairing destroyed by brake liquid by my fault, hopefully it was one black fairing. I'm not satisfied by the result, I think I'm gonna paint it better or paint the other fairing on the other side.
Sorry, it was too hard to disassembly it, so I painted it on the bike and protected everything around.










goodies





Changing the rear mudguard








Replacing white zip ties by black zip ties





Changing the breather hose

The bike was accelerating alone around 3500 RPM, so I checked out the gas command and the thread is not in a good condition.




I saw there is 2 emplacements for the gas cable. Is the power of the bike increase if we put the gas cable in the second emplacement ? If I do it, I need to cut the plastic between the 2 emplacements.
I don't think this is really to increase the power, but I prefer ask you the question to be sure.

Hello everyone, i've made the oil change and also changed the filter










I also had to paint some fairings because they were differents black tint










I had to prepare it again and paint it again because it was'nt correctly painted before
I had to remove the paint




It looks better now



This little cap looks good too

Done Something cool to my tyres