Page 7 of 12

Re: The wheels

Posted: Sat Jun 13, 2020 1:53 am
by benito brz
Hello everyone, I've put the bike on wheels, it looks amazing but the wheels aren't turning well, maybe because i didnt put the bearings correctly :expressionless:
Image
Image
Image
Image
Image

I've put this on the bearings so they can stay in
Image

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: BRAKE LIQUID ATTACK !!!!

Posted: Sat Jun 13, 2020 2:14 am
by benito brz
Here is the front brake, i received a lot of parts and i will change the pistons

Image
Image
Image
Image
Image
Image
Image

LETS PUT SOME BRAKE LIQUID SO IT WILL FIT EASIER

Image
Image

BUT THE PAINT ON THE BRAKE CALIPER IS GOING OUT BECAUSE I'M DUMB AND I'VE JUST PUT BASIC PAINT ON IT :rage:

Image
Image

I ALSO BLOCKED THE PISTONS, THEY WONT GO OUT !!!
SO I REASSEMBLY THE MASTER VAC AND PUT SOME BRAKE LIQUID IN IT SO THE PISTONS WILL MOVE, MY FATHER WAS HELPING ME, HE DOESNT WANT THE BEAUTIFUL PAINT OF THE MASTER VAC TO BE DESTROYED SO HE PROTECTED IT WITH SOME TAPE, BUT HE BROKES THE LITTLE WINDOW WITH HIS FINGER SO ALL THE BRAKE LIQUID DESTROYED THE MASTER VAC PAINT !!!! :rage:

Image
Image
Image
Image

JUST BECAUSE I WAS BUSY FOR THIS, I ORDERED A NEW BRAKE CALIPER AND MASTER VAC IN GERMANY, SO I DO NOT HAVE TO PAINT THEM :rage:
LESSON OF TODAY: DONT BE LIKE ME

Re: Netherlands parts

Posted: Sat Jun 13, 2020 8:52 am
by benito brz
New parts from netherlands

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Cleaning

Image
Image
Image
Image
Image
Image
Image

New clutch cable

Image
Image

Re: the rear brake

Posted: Sat Jun 13, 2020 8:53 am
by benito brz
The rear brake, this time i will not disassembly the pistons or paint anything because i changed the brake caliper 2 years ago, i will clean everything and change the screws and washers.

Image
Image
Image
Image
Image
Image
Image

Re: New wheels

Posted: Fri Jul 31, 2020 11:23 am
by benito brz
Hello everyone, i've bought some used wheels for cheap to replace my white wheels because they are too damaged to be used
but the wheels i bought on the internet are also a little damaged but its fixable, i want to paint them in white exactly like the others.
But my dad wants to take all my wheels to a guy who can fix them so i can use the white wheels and not paint again the other wheels.
I think we cant fix the white wheels but my dad wants to try, so i'm waiting for september for some news.

Image
Image
Image
Image
Image

Here is the damage on the wheels i bought

Image
Image

And here is the white wheels, the discs aren't right when i screw them up on the wheels

Image
Image

Re: The front brake

Posted: Fri Jul 31, 2020 11:49 am
by benito brz
Here is a new brake caliper and master cylinder from Germany :sunglasses:

Image
Image
Image
Image
Image
Image
Image
Image
Image

I've also noticed this

Image

Lets put it on the bike

Image
Image
Image
Image

New parts

Image

Too much thread locker :idea:

Image
Image
Image

Re: The rear brake

Posted: Fri Jul 31, 2020 12:00 pm
by benito brz
This screw was blocked, so I had to cut it

Image
Image

Lets change the piston

Image
Image
Image
Image
Image
Image
Image
Image
Image

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

New blanket for the bike

Image
Image

Re: Rust alert !!!!!

Posted: Fri Jul 31, 2020 12:09 pm
by benito brz
The screws wich i had removed the rust starts rusting again, apparently putting wd40 on it is not enough, so i took all of them, clean them, and put some anti-rust on them (owatrol)

Image
Image
Image
Image
Image
Image

And after :sunglasses:

Image

Re: Derbi GPR50 2003 France project

Posted: Fri Jul 31, 2020 12:19 pm
by jkv357
Wow! You have a new challenge every step of the way!

Good job working through it!

Just don't know what to say about the damage on both those sets of wheels. Doesn't make any sense to me.

Re: Derbi GPR50 2003 France project

Posted: Fri Jul 31, 2020 12:41 pm
by benito brz
jkv357 wrote:
Fri Jul 31, 2020 12:19 pm
Wow! You have a new challenge every step of the way!

Good job working through it!

Just don't know what to say about the damage on both those sets of wheels. Doesn't make any sense to me.
Hi jkv
Thanks you very much, I really hope i will find a solution for the wheels because i can't do anything without them on the bikes