Page 2 of 12
Re: Derbi GPR50 2003 France project
Posted: Tue Oct 01, 2019 11:51 am
by benito brz
The wheels and the swinging arm are paint:
The rear brake:
The wiring system that i'm not gonna use:
frame parts:
the fairings are ready for paint:
Some ideas
The rear brake again:
Looking nice
So the black wheels were too big for the tyres, so the guy who sold me the bike gives me other wheels, these were on the bike when i bought it, and i love them in red.
The front brake
Re: Derbi GPR50 2003 France project
Posted: Thu Oct 03, 2019 1:00 am
by Berkeley
Awesome stuff!!!!
Re: Derbi GPR50 2003 France project
Posted: Sat Oct 05, 2019 11:47 am
by benito brz
Berkeley wrote: ↑Thu Oct 03, 2019 1:00 am
Awesome stuff!!!!
Thanks!!
Re: Derbi GPR50 2003 France project
Posted: Mon Oct 07, 2019 10:35 am
by benito brz
Re: Derbi GPR50 2003 France project
Posted: Mon Oct 07, 2019 10:48 am
by benito brz
Re: Derbi GPR50 2003 France project
Posted: Fri Oct 11, 2019 11:36 am
by benito brz
Re: Derbi GPR50 2003 France project
Posted: Fri Oct 11, 2019 11:42 am
by benito brz
Derbi GPR50 2003 France project: Progress!!
Posted: Sat Oct 12, 2019 12:39 am
by toratora
You are doing a great job!
I don’t know what you budget is, but EasyParts has mirrors for around €7. Also, Simple Green, and WD40 will clean up the oil/water tank to nearly new looking.
Re: Derbi GPR50 2003 France project: Progress!!
Posted: Sat Oct 12, 2019 10:23 am
by benito brz
toratora wrote: ↑Sat Oct 12, 2019 12:39 am
You are doing a great job!
I don’t know what you budget is, but EasyParts has mirrors for around €7. Also, Simple Green, and WD40 will clean up the oil/water tank to nearly new looking.
Hey tora , the last picture i post were on august 2017 and i really wanted at this time to finish my bike before the end of school to show to others, to show what i've build myself. I've don't wanted to make it perfect but to ride it, so it wasn't perfect and i haven't the time to make it perfect, i took almost 2 years to build it before riding it because of the money, the money of my parents because i haven't money.
Now, i'm an apprentice in a truck and bus workshop and i earn money, I ride the bike a lot for 6/7 months to go to school and the work, it was so cool and the bike made the job, but I've lost some screws, the paint of the fairings and the frame are still not perfect, and some others little problems. After all that i passed my 125cc Driving license and i bought a Mash seventy five 125 to start and then i bought a beautiful Aprilia rs4 125 that i'm actually riding to school and work(Don't worry, i'm gonna do a topic for the rs4) So i've really wish to post on the gpr camp what i've done on my gpr. But I'm gonna make another restauration of the gpr, and this time, make every parts perfect because i wish to expose the bike in my future living room's house under a glass like a trophy of my youth, i'm 16 years old . Don't worry tora i have everything to clean up parts
Thanks
Re: Derbi GPR50 2003 France project
Posted: Wed Oct 16, 2019 12:12 pm
by benito brz