![Image](https://i.imgur.com/CJf5yoL.jpg)
I knew we were to have rain today, but I thought I might be able to get some wrenching in before it came down. I was mistaken!
I did get to take a look at the plug and the wash however before the precipitation arrived. There’s the hint that the tuning is moving in the right direction, as a nice caramel color is forming on the crown of the piston. Still not enough to display little crescent moons, but better than a polished look seen previously.
![](https://i.imgur.com/cwMME62.jpg)
![](https://i.imgur.com/ttNYATK.jpg)
![](https://i.imgur.com/kDusKSD.jpg)
![](https://i.imgur.com/Sp13QTH.jpg)
![](https://i.imgur.com/QHx0RDQ.jpg)
![](https://i.imgur.com/hdkzHPM.jpg)
![](https://i.imgur.com/Gbdjgbl.jpg)
![](https://i.imgur.com/lGYxEI9.jpg)
Sometimes it can be a real challenge to get a proper photo of the plug with a phone. The focus always seems to go to the background! Still with some perseverance it can be accomplished. The plug actually is looking pretty good. Still a little on the rich side, but not too bad.
![Astonished :astonished:](./images/smilies/astonished-face_1f632.png)
![](https://i.imgur.com/WhxLlLO.jpg)
I then started to open up the carb to swap out the slow jet. I didn’t make it very far because the Philips screws securing the float bowl decided that they liked their position. I was able to get one to free up, but the other is going to need the attention of the Lisel, as it started to strip out.
![Screaming Cat :scream_cat:](./images/smilies/weary-cat-face_1f640.png)
![](https://i.imgur.com/rtSzgf4.jpg)
![](https://i.imgur.com/eCFyI1X.jpg)
Then the rain came, and it was time to wrap it up—my kingdom for a garage!
![Paw Prints :paw_prints:](./images/smilies/paw-prints_1f43e.png)
![](https://i.imgur.com/g1DFNyt.jpg)
![](https://i.imgur.com/ZMmdA79.jpg)