google translation of TwoStrokeSE wrote:Top Performances - CDI box (Ducati) unthrottled
Price SEK 499.00
In Stock
Art.nr: TOP-9910150
Unthrottled CDI box with '' Power Control ''
Top Performances - unrestricted CDI box to Ducati ignition.
An unrestricted CDI box without revolutions stop and the "Power Control" from Top Performances.
The box is of high quality and is designed and developed to optimize ignition on your moped.
The CDI also has a very good ignition control called "Power Control", it ensures that the pre-ignition is prevented, which leads to a cleaner ignition.
This ignition control also ensures that you get a longer life for both ignition systems and spark plugs. Other great advantages are that fuel consumption is reduced by this also air pollution.
Motoparts CDI-box fit 6-speed Minarelli AM6 engine and other mopeds / motor models that use Ducati ignition with six coils.
To mount the CDI is very simple, to simply remove the original CDI box and replace it. To then connect the cables is very simple as the colors are the same as those used on the original CDI'n.
OBS !! This is a product developed for competition use only and may not be used if the vehicle will be used on public roads NOTE !!
Not suitable for: Yamaha / CPI-models from 2007 ->
NOTE! It is important that the earth wire on the CDI box proper contact when mounting otherwise there is a risk of CDI box damaged.
-----------------------------------------------------------------------------------
(Note: the text below only applies motocross scooters from the CPI)
To use this box on the CPI:
On CPI-models the cables different original equipment, but this CDI can be used if you connect as follows:
- There are five wires to the original CDI's:
Black, Black / White, Black / Red, Orange and Red / White (All of these, you should cut off so you can connect them to Stylepro CDI's).
- Black / white cable to the outer green pin on Stylepro CDI: n (stop button function).
- Black / Red connected to the other (penultimate) of the green pins on Stylepro CDI: n (ie, the next stop button).
- Orange connected to the white pin on Stylepro CDI: n.
- Red / White cable is connected to the red pin on Stylepro CDI: n.
- The black wire is the ground wire to the original CDI set, it does not need to be grounded when Stylepro CDI are equipped with their own ground wire (black with cable lug).
The black cable on Stylepro CDI: n connects you to the earth.
- The black and orange cable to the original ignition coil need not connect to anything. They can cut and Stripa to the frame or similar.