Page 1 of 1
Gaskets for GPR 75 EBE075 engine
Posted: Thu Feb 13, 2025 1:00 pm
by jkv357
I need a gasket set, mostly head gasket, for my GPR75 with the EBE075 engine.
Is there a model designation for the EBE075 engine? Is it an "AM-something"?
I would assume the head gasket for the 50 will not work with the 75 engine - is that correct?
Thanks.
Re: Gaskets for GPR 75 EBE075 engine
Posted: Tue Feb 18, 2025 8:01 am
by al_pritchard
Just checked a head gasket from the 50cc. It’s ~41mm so it wont work on the 075 top end. The 075 bore is ~47mm.
I think the gasket part number you need is J0000DB000319 - that’s a big think, but it may be worth a chance. (
https://comercialcasas.com/inicio/34330 ... 00319.html).
I see a number of gasket kits listed on eBay with that part number rebranding the 075. So maybe an option?
For archival reference:
EBE075 engine the stroke is 45mm, and the bore is ~47mm
Re: Gaskets for GPR 75 EBE075 engine
Posted: Tue Feb 18, 2025 9:47 am
by jkv357
al_pritchard wrote: ↑Tue Feb 18, 2025 8:01 am
Just checked a head gasket from the 50cc. It’s ~41mm so it wont work on the 075 top end. The 075 bore is ~47mm.
I think the gasket part number you need is J0000DB000319 - that’s a big think, but it may be worth a chance. (
https://comercialcasas.com/inicio/34330 ... 00319.html).
I see a number of gasket kits listed on eBay with that part number rebranding the 075. So maybe an option?
For archival reference:
EBE075 engine the stroke is 45mm, and the bore is ~47mm
Thanks Al!
I've been conversing with Treats, but they didn't have any definitive answers and asked me to pass along any info I can find.
Re: Gaskets for GPR 75 EBE075 engine
Posted: Fri Feb 21, 2025 7:57 am
by jkv357
Treats will get a gasket set with their next order.
Benji at Treats has been super helpful.
And thanks to Al for doing some digging to come up with the numbers. I was striking out.