Puch moped parts for sale.
-Magnum gas tank $250
-Magnum seat with trunk $175
-Complete 1980 Magnum rolling chassis $550
-Puch Cobra tank $100
-Puch Cobra seat $60
-Puch Magnum ltd 5 star wheelset, new tires $300
-2nd set of Magnum ltd 5 stars $200
-1980 Magnum frame and swing arm $400
-Black Magnum ltd cafe bars (new) $30
-Jawa (magnum) patina gas tank $200
-Hurcales speedo/tachometer set $150
-Magnum ltd trunk $65
-Magnum MKII hydro fork parts lot $85
-Puch Maxi/cobra fairing $75
-Magnum headlight $30
-Magnum ltd fairing $125
-Magnum ltd fairing decal set $45
Parts located in Columbus, Ohio
Support GPR Camp!!
Craig's List Parts Postings
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Puch Magnum parts - $$$ (Columbus)
► Show Spoiler
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Puch ZA50 moped engine, completely rebuilt & running - $549 (Saint Petersburg)
Completely rebuilt ZA50 Puch 2 speed engine.
Built on 10/22/18
Run up multiple times without issue, new piston, rings, bearings, seals, trans pucks, gaskets...
run up on 10/24/18 video here:
https://www.youtube.com/watch?v=Yfv-_BPdF-4
► Show Spoiler
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Kawaski AR50, AR80 Fairing - $250 (Denver)
"This fairing was manufactured by Kawaski Heavy Industries, Japan."
Type: AR-A
It has a couple of minor scratches, other than that, windshield is in great shape, fairing is in great shape, and the rubber trim is in great shape.
The fairing is a Panlite smoked fairing, DOT 260, M-2118, AS6/7.
A good public place to meet would be at the Sinclair Gas Station on West Colfax at I-70 (Exit 262) right off the off ramp. If no immediate answer when you call, please leave a message and I will call you right back.
► Show Spoiler
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Puch Magnum moped PARTS! - $500 (Orange County) Parts Postings
Making some room in my storage. Was going to take apart one my Puch Maxi moped and swap all the parts on this magnum frameset and powdercoat everything. Plans changed, I'll sell everything you see for $500. Thats the Tank(no dents, surface rust) Frame/ Swingarm, Seatpan, Rear Seat cowl, book rack, magnum forks, (also have headlight bucket and hardware but needs new glass and Stock handlebars!). mainly everything you need for the magnum swap!
You can swap all your parts onto this magnum from any puch.
$500 firm takes what you see. not parting it out sorry!
Any cheaper i'll just get this powdercoated and build it myself.
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Rieju parts (Brookfield)
I have a bunch of new OEM parts and some used stuff for the 50cc Rieju RS1 model and the RR50 model. These models were in production from the late 90's to the early 2000's. I restore and ride these bikes and have a lot of extra stuff to sell. I have new fairings, electrical parts, air filters, foot pegs, starters, clutch parts and other engine parts. I have wiring, hardware, top ends used and new, side covers, plus other stuff. Just send an email and I will check to see if I have it. Prices will be reasonable and I am willing to ship parts as well. I use paypal as well.
Just a few pics and if there is interest I can get more uploaded.
► Show Spoiler
1 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
FB: Paioli 125 PreGP forks - 450€
Hello guys!
For sale this nice Paioli front forks for 125 PreGP or GP bikes in nice usage condition. As you can see from the pics they have CNC bottoms for single caliper (can provide also the caliper if you need).
PM me for more information or other photos.
► Show Spoiler
1 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Derbies GPR50 engine and related parts - $400 (Peoria)
I have a partially disassembled Derbi GPR 50 engine for sale. I purchased the Derbi for the chassis to do an engine swap. Unfortunately I don't know why the prior owner pulled the engine. It will also come with the state and flywheel. If you are hunting for spare Derbi parts, then you know how difficult it is to get them. Sold all together. $400
► Show Spoiler
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Aprilia RS50 Technogas pipe - $200 (Austin)
Brand new Technogas expansion chamber, with all of the hardware. I thought I was going to use this pipe for something. But, alas, I have not. Give your Aprilia RS50 a little kick.
Also, this pipe will work on a Rieju RS1. They have the same Minarelli AM6 engine.
Thanks
► Show Spoiler
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
FB: 2003 Derbi GPR Engine - $250 (Burlington)
Rodgy has a GPR engine for sale in Iowa.
2003 GPR 50 engine $250 shipped in the states does run
0 x
- toratora
- Posts: 3161
- Joined: Wed Oct 11, 2017 1:05 am
- Location: San Francisco
- Replica: Derbi GPR
Cagiva Mito
Cobra CX65
Aprilia RS50 - x 1768
- x 1977
- Contact:
Craig's: Kawasaki AR80 parts bike - $300 (Belle Plaine)
AR80 parts bike what you see is what you get. No title. Engine turns over.
condition: salvage
make / manufacturer: Kawasaki
model name / number:AR80
0 x